- 精华
- 2
- 积分
- 2007
- 经验
- 2007 点
- 威望
- 175 点
- 金钱
- 589 ¥
- 魅力
- 337
|
比较像的两篇,供大家参考:
V1When an airplane is taken out of service for maintenance, it is often repainted as well, and during the repainting no other maintenance work can be done on the plane.In order to reduce maintenance time, airline officials are considering using a new nontoxic plastic film instead of paint.The film takes just as long to apply as paint does, but many other maintenance tasks can be carried out at the same time.
Which of the following, if true, is further evidence that using the film will help the airline officials achieve their goal?
(A) Unlike paint, the film gives a milky tone to certain colors.
(B) At the end of its useful life, the film can be removed much more quickly than paint can.
(C) The film can be applied only by technicians who have received special training.
(D) The metal exteriors of airplanes have to be protected from high temperatures and caustic chemicals such as exhaust gases.
(E) Even at speeds considerably higher than the normal speed of a passenger jet, the film remains securely attached.
答案:B
V2Paint on a new airliner is usually applied in two stages: first, a coat of primer, and then a top coat. A new process requires no primer, but instead uses two layers of the same newly developed coating, with each layer of the new coating having the same thickness and weight as a traditional top coat. Using the new process instead of the old process increases the price of a new aircraft considerably.
Which of the following, if true, most strongly indicates that it is in an airline's long-term economic interest to purchase new airliners painted using the new process rather than the old process?
(A) Although most new airliners are still painted using the old process, aircraft manufacturers now offer a purchaser of any new airliner the option of having it painted using the new process instead.
(B) A layer of primer on an airliner weighs more than a layer of the new coating would by an amount large enough to make a difference to that airliner's load-bearing capacity.
(C) A single layer of the new coating provides the aluminum skin of the airliner with less protection against corrosion than does a layer of primer of the usual thickness.
(D) Unlike the old process, the new process was originally invented for use on spacecraft, which are subject to extremes of temperature to which airliners are never exposed.
(E) Because the new coating has a viscosity similar to that of a traditional top coat, aircraft manufacturers can apply it using the same equipment as is used for a traditional top coat.
答案是B |
|